Prof. Dr.-Ing. Bahman Azarhoushang
Leiter Kompetenzzentrum für Spanende Fertigung
Stationen
Prof. Dr.-Ing. B. Azarhoushang ist seit September 2013 Professor an der Hochschule Furtwangen in der Fakultät Mecanical and Medical Engineering und gleichzeitig Leiter des KSF-Instituts (Kompetenzzentrum für Spanende Fertigung). Er verfügt dort über moderne Maschinen, Vorrichtungen, Messgeräte und Räumlichkeiten für die Durchführung zahlreicher Forschungsprojekte.
Prof. Azarhoushang hat über 55 Publikationen in verschiedenen Sprachen veröffentlicht. Zahlreiche Vorträge auf nationalen und internationalen Konferenzen belegen seine Forschungsaktivitäten.
Forschungsfelder und / oder Lehrgebiete
Lehrgebiete
- Fertigungstechnik
- Werkzeugmaschinen
- Fertigungsmesstechnik
- Precision Manufacturing
Forschungsgebiete
- Prozessoptimierung, Schleifen und Feinstbearbeitung
- Hochgeschwindigkeits-/Hochleistungsschleifen
- Innovative Werkzeuge
- Ultraschallunterstütztes Schleifen, Abrichten, Superfinishing
- Laserunterstütztes Schleifen und Abrichten
- Erzeugung sehr feiner Oberflächen
- Mikrozerspanung
- Online-Messung
Publikationen
Azarhoushang, Bahman
2023 |
|||
| Bahman Azarhoushang, Jahangir Khosravi, Ali Zahedi, Heike Kitzig-Frank | Erodieren von superabrasiven Schleif- und Abrichtwerkzeugen | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 14.Seminar 2023, pp. 4b-1-4b-17, 2023 | BibTeX | RIS 978-3-8027-3180-8, |
| Bahman Azarhoushang, Björn Becker | Grain Vision | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 14.Seminar 2023, pp. 4c-1-4c-9, 2023 | BibTeX | RIS 978-3-8027-3180-8, |
| Serge Shamray, Bahman Azarhoushang, Ali Zahedi | Impact of the touch dressing and laser structuring of electroplated grinding pins on micro-grinding of Si3N4 | CIRP Journal of Manufacturing Science and Technology, 41.2023(April), pp. 44-54, 2023 | BibTeX | RIS DOI |
| Masih Paknejad, Bahman Azarhoushang, Ali Zahedi, Mehdi Khakrangin, Mohammadali Kadivar | Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratching | The International Journal of Advanced Manufacturing Technology, 125.2023(5-6), pp. 2759-2775, 2023 | BibTeX | RIS DOI URN |
| Esmaeil Ghadiri Zahrani, Masih Paknejad, Ali Zahedi, Bahman Azarhoushang | Laser-Assisted Cylindrical Grinding of Silicon Nitride Ceramics | SSRN : Social Science Research Network, 2023 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Ali Zahedi, Robert Bösinger | Laserunterstütztes Schleifen diamanthaltiger Werkstoffe | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 14.Seminar 2023, pp. 4d-1-4d-6, 2023 | BibTeX | RIS 978-3-8027-3180-8, |
| Ali Zahedi, Bahman Azarhoushang, Masih Paknejad, Esmaeil Ghadiri Zahrani, Heike Kitzig-Frank | Laserunterstütztes Schleifen von hochharten Werstoffen | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 14.Seminar 2023, pp. 20-1-20-18, 2023 | BibTeX | RIS 978-3-8027-3180-8, |
| Bahman Azarhoushang, Heike Kitzig-Frank, Faramarz Hojati | Selbstlernender virtueller Schleifexperte - Grinding Expert | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 14.Seminar 2023, pp. 4a-1-4a-12, 2023 | BibTeX | RIS 978-3-8027-3180-8, |
| Roman Wdowik, Pawel Litwin, Artur Belzo, Artur Borowiec, Marek Magdziak, Barbara Ciecinska, Angelos Markopoulos, Bahman Azarhoushang, Faramarz Hojati | Selected case studies regarding research-based education in the area of machine and civil assemblies | Technologia i Automatyzacja Montazu, 119.2023(1), pp. 44-53, 2023 | BibTeX | RIS DOI |
2022 |
|||
| Mohammadali Kadivar, Bahman Azarhoushang | Cutting temperature and energy partitioning in grinding | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 469-505, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Qingfeng Ai, Jahangir Khosravi, Bahman Azarhoushang, Amir Daneshi, Björn Becker | Digital light processing-based additive manufacturing of resin bonded SiC grinding wheels and their grinding performance | The International Journal of Advanced Manufacturing Technology, 118.2022(5-6), pp. 1641-1657, 2022 | BibTeX | RIS DOI URN |
| Serge Shamray, Bahman Azarhoushang, Masih Paknejad, Andreas Buechler | Ductile-brittle transition mechanisms in micro-grinding of silicon nitride | Ceramics International, 48.2022(Issue 23, Part A), pp. 34987-34998, 2022 | BibTeX | RIS DOI |
| Mohammad Khoran, Bahman Azarhoushang, Hossein Amirabadi | Evaluating the influence of reinforcing fiber type on the grinding process of PEEK’s composites | The International Journal of Advanced Manufacturing Technology, 119.2022(3-4), pp. 2187-2200, 2022 | BibTeX | RIS DOI |
| Esmaeil Ghadiri Zahrani, Bahman Azarhoushang, Jürgen Wilde | Evaluation of chip breaking in combined laser-turning process | Journal of Manufacturing Processes, 77.2022(May), pp. 722-729, 2022 | BibTeX | RIS DOI |
| Bahman Azarhoushang | Fluid delivery | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 653-687, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Bahman Azarhoushang, Heike Kitzig-Frank | Grinding tool conditioning | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 241-349, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Bahman Azarhoushang | Grinding wheel macrodesign and microtopography | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 203-240, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Jahangir Khosravi, Bahman Azarhoushang, Mohsen Barmouz, Robert Bösinger, Ali Zahedi | High-speed milling of Ti6Al4V under a supercritical CO2 + MQL hybrid cooling system | Journal of Manufacturing Processes, 82.2022(October 22), pp. 1-14, 2022 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Jahangir Khosravi, Mohsen Barmouz, Robert Bösinger, Ali Zahedi, Heike Kitzig-Frank | Hochgeschwindigkeitsfräsen von Ti6Al4V mit einem überkritischem CO2‐ + MMS-Hybridkühlsystem | Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 4. Innovation Forum Zerspanungstechnologie, 2022, pp. 3-1-3-15, 2022 | BibTeX | RIS 978-3-8027-3175-4, |
| Esmaeil Ghadiri, Michael Maier, Bahman Azarhoushang, Heike Kitzig-Frank | Hybride Werkzeugmaschinen / Laser-Drehen und Laser-Abrichten | Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 4. Innovation Forum Zerspanungstechnologie, 2022, pp. 15-1-15-10, 2022 | BibTeX | RIS 978-3-8027-3175-4, |
| Bahman Azarhoushang | Implantate mit glatter Oberfläche | Kunststoffe, 112.2022(4), pp. 46-48, 2022 | BibTeX | RIS |
| Philipp Hoier, Bahman Azarhoushang, Per Lundin, Amir Malakizadi, Jeffrey Badger, Albin Stormvinter, Thomas Björk, Uta Klement, Fukou Hashimoto, Peter Krajnik | Influence of batch-to-batch material variations on grindability of a medium‑carbon steel | Journal of Manufacturing Processes, 73.2022(January), pp. 463-470, 2022 | BibTeX | RIS DOI |
| Björn Becker, Pia Schnarrenberger, Bahman Azarhoushang | Innovativer hybrider Schleifscheibengrundkörper – Teil 1 mit CBN Belag | InDiamond.World, 2022 | BibTeX | RIS |
| Masih Paknejad, Bahman Azarhoushang, Ali Zahedi, Mehdi Khakrangin, Mohammadali Kadivar | Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratching | Research Square, 2022 | BibTeX | RIS DOI |
| Mohammadali Kadivar, Bahman Azarhoushang | Kinematics and material removal mechanisms of loose abrasive machining | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 507-536, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Faramarz Hojati, Bahman Azarhoushang, Amir Daneshi, Dirk Biermann | Laser pre‑structure‑assisted micro‑milling of Ti6Al4V titanium alloy | The International Journal of Advanced Manufacturing Technology, 120.2022(3-4), pp. 1765-1776, 2022 | BibTeX | RIS DOI URN |
| Dirk Obergfell, Ali Zahedi, Bahman Azarhoushang | Lotuseffekt durch Licht | 2022 | BibTeX | RIS |
| Amir Daneshi, Bahman Azarhoushang | Machinability of materials | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 591-612, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Bahman Azarhoushang, Amir Daneshi | Mechanisms of tool wear | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 539-554, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 4. Innovation Forum Zerspanungstechnologie, 2022 | Bahman Azarhoushang, Thomas Wolf (Eds.)2022 | BibTeX | RIS 978-3-8027-3175-4, |
|
| Bahman Azarhoushang, Heike Kitzig-Frank | Optimieren und Beherrschen der Schleiftechnologie durch den Grinding-Expert | Jahrbuch Schleifen, Honen, Läppen und Polieren : Verfahren und Maschinen, Vulkan: Essen, pp. 257-272, 2022 | BibTeX | RIS 978-3-8027-3176-1, |
| Faramarz Hojati, Bahman Azarhoushang | Predicting critical machining conditions using time-series imaging and deep learning in slot milling of titanium alloy | The Upper-Rhine Artificial Intelligence Symposium UR-AI 2022 : AI Applications in Medicine and Manufacturing, 19 October 2022, Villingen-Schwenningen, Germany, pp. 57-63, 2022 | BibTeX | RIS 978-3-00-073638-4, URN |
| Faramarz Hojati, Bahman Azarhoushang, Amir Daneshi, Rostam Hajyaghaee Khiabani | Prediction of Machining Condition Using Time Series Imaging and Deep Learning in Slot Milling of Titanium Alloy | Journal of Manufacturing and Materials Processing, 6.2022(6), 2022 | BibTeX | RIS DOI URN |
| Bahman Azarhoushang, Heike Kitzig-Frank | Principles of grinding processes | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 351-468, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Bahman Azarhoushang | Process fluids for abrasive machining | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 615-652, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Bahman Azarhoushang, Erik Poulsen | Superkritisches CO2-Fräsen medizinischer Kunststoffe | MAV, 2022(1), pp. 32-34, 2022 | BibTeX | RIS |
| Bahman Azarhoushang, Mohammadali Kadivar | Thermal aspects of abrasive machining processes | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 555-573, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Ali Zahedi, Bahman Azarhoushang | Tribochemistry of abrasive machining | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 689-719, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Bahman Azarhoushang, Erik Poulsen | UHMWPE Milling with Supercritical CO2 | American Machinist, 2022 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang, Mohammadali Kadivar | UKP-Laserunterstütztes Schleifen von hochharten Werkstoffen | Jahrbuch Schleifen, Honen, Läppen und Polieren : Verfahren und Maschinen, Vulkan: Essen, pp. 21-37, 2022 | BibTeX | RIS 978-3-8027-3176-1, |
| Bahman Azarhoushang, Amir Daneshi | Workpiece surface roughness | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 575-590, 2022 | BibTeX | RIS DOI 978-0-12-823777-9, |
2021 |
|||
| Bahman Azarhoushang | Abrasive machining proccesses | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 75-120, 2021 | BibTeX | RIS 978-0-12-823777-9, DOI |
| Bahman Azarhoushang | Abrasive tools | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 31-73, 2021 | BibTeX | RIS 978-0-12-823777-9, DOI |
| Bahman Azarhoushang | Abrasives | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 3-30, 2021 | BibTeX | RIS 978-0-12-823777-9, DOI |
| Bahman Azarhoushang, , Heike Kitzig-Frank | Abricht- und Schleiftechnologie 3 - Grundlagen der Schleiftechnologie, Schleifmittel und Schleifwerkzeuge | Abricht- und Schleiftechnologie Verlag GbR: Villingen-Schwenningen, 978-3-9821211-2-3, 2021 | BibTeX | RIS 978-3-9821211-2-3, |
| Ali Zahedi, Christian Jauch, Bahman Azarhoushang | Application of an Ultrashort-pulsed Laser for Generation of Super-hydrophobic Surfaces | Current Directions in Biomedical Engineering, 7.2021(2), pp. 527-530, 2021 | BibTeX | RIS DOI URN |
| Bahman Azarhoushang, Ali Zahedi | Contact mechanics | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 179-201, 2021 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Mohammad Baraheni, Bahman Azarhoushang, Amir Daneshi, Mohammadali Kadivar, Saied Amini | Development of an expert system for optimal design of the grinding process | The International Journal of Advanced Manufacturing Technology, 2021 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Qingfeng Ai, Heike Kitzig-Frank | Digital Light Processing-basierte additive Fertigung von kunstharzgebundenen Schleifscheiben | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 13. Seminar, 2021, pp. 4a-1-4a-16, 2021 | BibTeX | RIS 978‐3‐9821211‐9‐2, |
| Bahman Azarhoushang | Effiziente Herstellung von medizinischen Bauteilen | mav : Innovation in der spanenden Fertigung, 2021(12), p. 38, 2021 | BibTeX | RIS |
| Bahman Azarhoushang | Effiziente substraktive Fertigungsverfahren für die Medizintechnik | 13. Innovation Forum Medizintechnik, 21. Oktober 2021, Tuttlingen, Germany, 2021 | BibTeX | RIS |
| Mohammad Khoran, Bahman Azarhoushang, Hossein Amirabadi | Evaluation and investigation of grinding process of biomedical polymer (PEEK) | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235.2021(6), pp. 1858-1868, 2021 | BibTeX | RIS DOI |
| Mohammad Khoran, Hossein Amirabadi, Bahman Azarhoushang | Evaluation of chip formation process in the grinding of GFRP and CFRP | Modares Mechanical Engineering, 21.2021(12), pp. 849-857, 2021 | BibTeX | RIS |
| Mohammad Khoran, Bahman Azarhoushang, Amir Daneshi | Experimental study of single grit scratch test on carbon fiber-reinforced polyether ether ketone | Production Engineering, 15.2021(5), pp. 751-759, 2021 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Heike Kitzig-Frank | Expertensystem für Schleifprozesse | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 13. Seminar, 2021, pp. 4d-1-4d-11, 2021 | BibTeX | RIS 978-3-9821211-9-2, |
| Isman M. Khazi, Andras Kovacs, Ulrich Mescheder, Ali Zahedi, Bahman Azarhoushang | Fusion of Optical and Microfabricated Eddy-Current Sensors for the Non-Destructive Detection of Grinding Burn | Advances in Science, Technology and Engineering Systems Journal, 6.2021(1), pp. 1414-1421, 2021 | BibTeX | RIS DOI URN |
| Bahman Azarhoushang, Heike Kitzig-Frank | Grinding Expert: entscheidende Unterstützung für die Schleiftechnologie | Schleifen und Polieren, 25.2021(4), pp. 18-23, 2021 | BibTeX | RIS |
| Ali Zahedi, Jahangir Khosravi, Bahman Azarhoushang | Grinding efficiency and profile accuracy of diamond grinding wheels dressed with wire electrical discharge conditioning(WEDC) | The International Journal of Advanced Manufacturing Technology, 117.2021(7/8), pp. 2163-2171, 2021 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Ali Zahedi, Heike Kitzig-Frank | Hoch effizientes Außenrundschleifen von Si3N4-Keramik durch Laserstrukturierung | Diamond Business, pp. 32-38, 2021 | BibTeX | RIS |
| Björn Becker, Bahman Azarhoushang | Innovative Messtechnik für die Verschleiß‐ und Zusetzungserkennung | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 13. Seminar, 2021, pp. 20-1-20-12, 2021 | BibTeX | RIS 978-3-9821211-9-2, |
| Bahman Azarhoushang, Esmaeil Ghadiri Zahrani, Ali Zahedi, Heike Kitzig-Frank | Innovatives Konzept für das Laserkonditionieren von Schleifwerkzeugen | Diamond Business, pp. 46-49, 2021 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang | Kinematics of bonded abrasive machining processes | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 137-151, 2021 | BibTeX | RIS 978-0-12-823777-9, DOI |
| Bahman Azarhoushang, Esmaeil Ghadiri Zahrani, Ali Zahedi, Heike Kitzig-Frank | Laserprofilieren von Schleifscheiben | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 13. Seminar, 2021, Bahman Azarhoushang (Ed.)pp. 4b-1-4b-7, 2021 | BibTeX | RIS 978-3-9821211-9-2, |
| Bahman Azarhoushang, Ali Zahedi, Heike Kitzig-Frank | Laserunterstütztes Rundschleifen von Si3N4-Keramik | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 13. Seminar, 2021, pp. 4c-1-4c-9, 2021 | BibTeX | RIS 978-3-9821211-9-2, |
| Bahman Azarhoushang, Mohammadali Kadivar | Material removal mechanisms of bonded abrasive machining (forces, friction, and energy) | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 153-178, 2021 | BibTeX | RIS DOI 978-0-12-823777-9, |
| Mohammadali Kadivar, Bahman Azarhoushang, Peter Krajnik | Modeling of micro-grinding forces considering dressing parameters and tool deflection | Precision Engineering, 67.2021(January), pp. 269-281, 2021 | BibTeX | RIS DOI URN |
| Bahman Azarhoushang(Ed.) | Moderne Schleiftechnologie und Feinstbearbeitung : Neue Entwicklungen und Trends aus Forschung und Praxis; 13. Seminar, 2021 | Abricht- und Schleiftechnologie GbR: Villingen-Schwenningen, 978-3-9821211-9-2, 2021 | BibTeX | RIS 978-3-9821211-9-2, |
| Bahman Azarhoushang, Heike Kitzig-Frank, Qingfeng Ai | Potenzial der additiven Fertigung kunstharzgebundener Schleifscheiben | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, 13.2021(3), pp. 28-35, 2021 | BibTeX | RIS |
| Babak Soltani, Faramarz Hojati, Amir Daneshi, Bahman Azarhoushang | Simulation of the laser-material interaction of ultrashort pulse laser processing of silicon nitride workpieces and the key factors in the ablation process | The International Journal of Advanced Manufacturing Technology, 114.2021(11), pp. 3719-3738, 2021 | BibTeX | RIS DOI URN |
| Mohammadali Kadivar, Bahman Azarhoushang, Uta Klement, Peter Krajnik | The role of specific energy in micro-grinding of titanium alloy | Precision Engineering, Vol.72.2021, pp. 172-183, 2021 | BibTeX | RIS DOI URN |
| Bahman Azarhoushang, , Ioan D. Marinescu, , W. Brian Rowe, , Boris Dimitrov, , Hitoshi Ohmori | Tribology and Fundamentals of Abrasive Machining Processes | William Andrew: Oxford, 978-0-12-823777-9, 2021 | BibTeX | RIS 978-0-12-823777-9, DOI |
| Amir Daneshi, Bahman Azarhoushang | Tribosystems of abrasive machining processes | Tribology and Fundamentals of Abrasive Machining Processes, William Andrew: Oxford, pp. 121-133, 2021 | BibTeX | RIS 978-0-12-823777-9, DOI |
2020 |
|||
| Esmaeil Ghadiri Zahrani, Bahman Azarhoushang, Jürgen Wilde, Ali Zahedi | Ablation characteristics of picosecond laser single point drilling of Si3N4 under dry and water medium | Procedia CIRP, pp. 938-943, 2020 | BibTeX | RIS DOI |
| Bahman Azarhoushang, , Heike Kitzig-Frank | Abricht- und Schleiftechnologie 2 - Schleifverfahren - Außenrund-, Flach-, Innenrund-, Spitzenlos- und Werkzeugschleifen | Abricht- und Schleiftechnologie GbR: Villingen-Schwenningen, 978-3-9821211-1-6, 2020 | BibTeX | RIS 978-3-9821211-1-6, |
| Esmaeil Ghadiri Zahrani, Faramarz Hojati, Amir Daneshi, Bahman Azarhoushang, Jürgen Wilde | Application of machine learning to predict the product quality and geometry in circular laser grooving process | Procedia CIRP, pp. 474-480, 2020 | BibTeX | RIS DOI |
| Andras Kovacs, Isman M. Khazi, Ali Zahedi, Ulrich Mescheder, Bahman Azarhoushang | Development of an Optical Sensor for the Non-Destructive Testing of Grinding Burn | IEEE Sensors 2020, October 25-28, 2020, Rotterdam, Netherlands, 2020 | BibTeX | RIS |
| Siamak Mirifar, Mohammadali Kadivar, Bahman Azarhoushang | First Steps through Intelligent Grinding Using Machine Learning via Integrated Acoustic Emission Sensors | Journal of Manufacturing and Materials Processing, 04.2020(2 Aufsatz 35), 2020 | BibTeX | RIS DOI URN |
| Isman M. Khazi, Andras Kovacs, Ali Zahedi, Christian Reser, Ulrich Mescheder, Bahman Azarhoushang, Christoph Reich | In situ Qualitätsbeurteilung von Schleifprozessen mittels Mikrosystemtechnik basierter Sensorfusion | ZfP heute : Wissenschaftliche Beiträge zur zerstörungsfreien Prüfung heute; Sonderband 2020, pp. 99-101, 2020 | BibTeX | RIS 978-3-947971-10-7, |
| Jahan Khosravi, Esmaeil Ghadiri Zahrani, Ali Zahedi, Bahman Azarhoushang, Heike Kitzig-Frank | Innovative Fertigungsverfahren | 2020 | BibTeX | RIS |
| Sergey Shamray, Mohammadali Kadivar, Amir Daneshi, Bahman Azarhoushang | Leistung von Schleifstiften mit unterschiedlichen Bindungen beim Mikroschleifen von Si3N4 | Diamond Business, pp. 10-15, 2020 | BibTeX | RIS |
| Ali Zahedi, Jahangir Khosravi, Bahman Azarhoushang | Leistungsfähigkeit und Genauigkeit funkenerosiv-konditionierter Schleifwerkzeuge | Jahrbuch Schleifen, Honen, Läppen und Polieren, Vulkan Verlag: Essen, pp. 28-36, 2020 | BibTeX | RIS 978-3-8027-3133-4, |
| Isman M. Khazi, Andras Kovacs, Ali Zahedi, Ulrich Mescheder, Bahman Azarhoushang | Microfabricated Eddy-Current Sensors for Non-Destructive Testing of the Micro Grinding Burn | IEEE Sensors 2020, October 25-28, 2020, Rotterdam, Netherlands, 2020 | BibTeX | RIS |
| Serge Shamray, Mohammadali Kadivar, Amir Daneshi, Bahman Azarhoushang | Performance of micro-grinding pins with different bonding while micro-grinding Si3N4 | International Journal of Abrasive Technology, 10.2020(1), pp. 16-31, 2020 | BibTeX | RIS DOI |
| Isman M. Khazi, Andras Kovacs, Ali Zahedi, Christian Reser, Ulrich Mescheder, Bahman Azarhoushang, Christoph Reich | Real time In-Situ Quality Monitoring of Grinding Process using Microtechnology based Sensor Fusion | 2020 IEEE International Conference on Semiconductor Electronics (ICSE), Kuala Lumpur, Malaysia, 2020, pp. 180-184, 2020 | BibTeX | RIS DOI 978-1-7281-5968-3, |
| Mohammad Khoran, Bahman Azarhoushang, Hossein Amirabadi | Study and investigation of cutting energy and chip formation in the grinding process of polyether ether ketone | Iranian Journal of Manufacturing Engineering, 07.2020(7), pp. 51-58, 2020 | BibTeX | RIS |
| Faramarz Hojati, Amir Daneshi, Babak Soltani, Bahman Azarhoushang, Dirk Biermann | Study on machinability of additively manufactured and conventional titanium alloys in micro-milling process | Precision Engineering, 62.2020(March), pp. 1-9, 2020 | BibTeX | RIS DOI |
| Mohammadali Kadivar, Bahman Azarhoushang, Amir Daneshi, Peter Krajnik | Surface integrity in micro-grinding of Ti6Al4V considering the specific micro-grinding energy | Procedia CIRP, Vol.87.2020, pp. 181-185, 2020 | BibTeX | RIS DOI URN |
| Mohammad Khoran, Bahman Azarhoushang, Hossain Amirabadi | The effect of cryogenic cooling on surface topography in the PEEK grinding process تأثیر خنککننده برودتی بر توپوگرافی سطح در فرایند سنگزنی پلیاتراترکتون | Iranian Journal of Manufacturing Engineering, 07.2020(1), pp. 1-12, 2020 | BibTeX | RIS |
| Mohammad Khoran, Hossein Amirabadi, Bahman Azarhoushang | The effects of cryogenic cooling on the grinding process of polyether ether ketone (PEEK) | Journal of Manufacturing Processes, 56.2020(Part A August), pp. 1075-1087, 2020 | BibTeX | RIS DOI |
| Werkzeugmaschine zur Laserkonditionierung von Schleifwerkzeugen unabhängig von deren Spezifikation | 2020 | BibTeX | RIS |
|
2019 |
|||
| Bahman Azarhoushang, , Heike Kitzig-Frank | Abricht- und Schleiftechnologie 1 – Konditionieren von Schleifwerkzeugen – Abrichten, Profilieren und Schärfen | Abricht- und Schleiftechnologie Verlag: Villingen-Schwenningen, 978-3-9821211-0-9, 2019 | BibTeX | RIS 978-3-9821211-0-9, |
| Bahman Azarhoushang, Mohammadali Kadivar, Robert Bösinger, Sergey Shamray, Ali Zahedi, Amir Daneshi | High-speed high-efficient grinding of CMCs with structured grinding wheels | International Journal of Abrasive Technology, 09.2019(1), pp. 1-15, 2019 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Mohammadali Kadivar | Hybridbearbeitungsprozesse Teil 1: Ultrakurzpulslaserunterstütztes Fräsen | Diamond business, 70.2019(3), pp. 54-61, 2019 | BibTeX | RIS |
| Bahman Azarhoushang, Esmaeil Ghadiri, Heike Kitzig-Frank | Hybridbearbeitungsprozesse Teil 2: Hybride Laser- und Drehbearbeitung | Diamond Business, 71.2019(4), pp. 48-51, 2019 | BibTeX | RIS |
| Bahman Azarhoushang, Sebastian Ludwig | In-process grinding wheel wear evaluation using digital image processing | International Journal of Abrasive Technology, 9.2019(2), pp. 99-112, 2019 | BibTeX | RIS DOI |
| Mohammadali Kadivar, Bahman Azarhoushang | Intelligent Grinding Process via Artificial Neural Networks | Artificial Intelligence: From Research to Application: The Upper-Rhine Artificial Intelligence Symposium UR-AI 2019, March 13th, 2019, Offenburg, Germany, pp. 77-82, 2019 | BibTeX | RIS 978-3-9820756-0-0, |
| Mohammad Khoran, Hossain Amirabadi, Bahman Azarhoushang | Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test بررسی رفتار ماشینکاری پلیمر پلیاتراترکتون در آزمون تک دانه ساینده | Iranian Journal of Manufacturing Engineering, 06.2019(9), pp. 54-62, 2019 | BibTeX | RIS |
| Babak Soltani, Bahman Azarhoushang, Ali Zahedi | Laser ablation mechanism of silicon nitride with nanosecond and picosecond lasers | Optics & Laser Technology, 119.2019(November), 2019 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Ali Zahedi, Babak Soltani, Mohammadali Kadivar, Heike Kitzig-Frank | Laser optimiert Zerspanung | WB Werkstatt + Betrieb, 152.2019(4), pp. 16-19, 2019 | BibTeX | RIS |
| Mohammadali Kadivar, Sergey Shamray, Babak Soltani, Amir Daneshi, Bahman Azarhoushang | Laser-assisted micro-grinding of Si3N4 | Precision Engineering, Vol.60.2019, pp. 394-404, 2019 | BibTeX | RIS DOI |
| Mohammadali Kadivar, Bahman Azarhoushang, Ali Zahedi, Claas Müller | Laser-assisted micro-milling of austenitic stainless steel X5CrNi18-10 | Journal of Manufacturing Processes, 48.2019(December), pp. 174-184, 2019 | BibTeX | RIS DOI |
| Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 3. Innovation Forum Zerspanungstechnologie, 2019 | Bahman Azarhoushang, Thomas Wolf (Eds.)2019 | BibTeX | RIS 978-3-8027-3130-3, |
|
| Bahman Azarhoushang, Heike Kitzig-Frank | Moderne Zerspanungstechnologien - Hartbearbeitung / Bearbeitung gehärteter Stähle | Moderne Zerspanungstechnologie, pp. 2a-1-2a-13, 2019 | BibTeX | RIS 978-3-8027-3130-3, |
| Bahman Azarhoushang, Heike Kitzig-Frank, Mohammadali Kadivar | Moderne Zerspanungstechnologien - High Speed Cutting (Hochgeschwindigkeitszerspanung) | Moderne Zerspanungstechnologie, pp. 2b-1-2b-9, 2019 | BibTeX | RIS 978-3-8027-3130-3, |
| Bahman Azarhoushang, Heike Kitzig-Frank, Mohammadali Kadivar, Esmaeil Ghadiri | Moderne Zerspanungstechnologien - Hybridbearbeitungsprozesse | Moderne Zerspanungstechnologie, pp. 2c-1-2c-14, 2019 | BibTeX | RIS 978-3-8027-3130-3, |
| Bahman Azarhoushang, Heike Kitzig-Frank, Mohammad Khoran | Moderne Zerspanungstechnologien - Nachhaltige Bearbeitungsverfahren | Moderne Zerspanungstechnologie, pp. 2d-1-2d-9, 2019 | BibTeX | RIS 978-3-8027-3130-3, |
| Sebastian Ludwig, Bahman Azarhoushang | Prozessmonitoring für effiziente Schleifprozesse | Schleifen + Polieren, 23.2019(1), pp. 20-27, 2019 | BibTeX | RIS |
| Babak Soltani, Faramarz Hojati, Amir Daneshi, Bahman Azarhoushang | Simulation of laser ablation mechanism of silicon nitride by ultrashort pulse laser | Procedia CIRP, Vol.82.2019, pp. 208-213, 2019 | BibTeX | RIS DOI URN |
| Mohammadali Kadivar, Amir Daneshi, Robert Bösinger, Bahman Azarhoushang | Spezifische Energie beim Schleifen von Wolframcarbid-Kobalt | Schleifen + Polieren, 23.2019(6), pp. 6-14, 2019 | BibTeX | RIS |
| Mohammad Khoran, Hossein Amirabadi, Bahman Azarhoushang | بررسی و مطالعه بارگیری چرخ سنگ در فرایند سنگزنی | Scientific and Extension Journal of the Society of Mechanical Engineers of Iran, 27.2019(2), pp. 35-42, 2019 | BibTeX | RIS |
2018 |
|||
| Amir Daneshi, Konstantin Müller, Bahman Azarhoushang | Cylindrical plunge grinding of twist free surfaces by structured wheels | Precision Engineering, 51.2018(1), pp. 481-489, 2018 | BibTeX | RIS DOI |
| Heike Kitzig-Frank, Bahman Azarhoushang, Sergey Shamray | Duktile Zerspanung spröder Werkstoffe | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 12. Seminar 2018, pp. 4d-1-4d-14, 2018 | BibTeX | RIS 978-3-8027-3112-9, |
| Sebastian Ludwig, Bahman Azarhoushang | Effizienter Schleifprozess durch Prozessmonitoring | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 12. Seminar 2018, pp. 20-1-20-14, 2018 | BibTeX | RIS 978-3-8027-3112-9, |
| Bahman Azarhoushang, Ali Zahedi, Babak Soltani, Heike Kitzig-Frank | Einsatz des Lasers in der Schleiftechnologie | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 12. Seminar 2018, pp. 4a-1-4a-14, 2018 | BibTeX | RIS 978-3-8027-3112-9, |
| Bahman Azarhoushang, Heike Kitzig-Frank, Robert Bösinger | Erzeugung großflächiger spiegelnder Oberflächen | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 12. Seminar 2018, pp. 4c-1-4c-11, 2018 | BibTeX | RIS 978-3-8027-3112-9, |
| Bahman Azarhoushang, Mohammadali Kadivar, Robert Bösinger, Sergey Shamray, Ali Zahedi, Amir Daneshi | High-speed high-efficient grinding of CMCs with structured grinding wheels | ISAAT2018: The 21st International Symposium on Advances in Abrasive Technology, October 14– 17, 2018, Toronto, Canada, 2018 | BibTeX | RIS |
| Sebastian Ludwig, Bahman Azarhoushang | In-process grinding wheel wear evaluation using digital image processing | ISAAT2018: The 21st International Symposium on Advances in Abrasive Technology, October 14– 17, 2018, Toronto, Canada, 2018 | BibTeX | RIS |
| Heike Kitzig-Frank, Bahman Azarhoushang | Innovatives Konditionierungsverfahren (Fragmentierung) | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 12. Seminar 2018, pp. 4b-1-4b-9, 2018 | BibTeX | RIS 978-3-8027-3112-9, |
| Bahman Azarhoushang, Ali Zahedi, Babak Soltani | Laserunterstütztes Schleifen von Hochleistungskeramiken | Jahrbuch Schleifen, Honen, Läppen und Polieren, Vulkan Verlag: Essen, pp. 199-209, 2018 | BibTeX | RIS 978-3-8027-3092-4, |
| Moderne Schleiftechnologie und Feinstbearbeitung | 12. Seminar 2018 "Moderne Schleiftechnologie und Feinstbearbeitung", Bahman Azarhoushang (Ed.)2018 | BibTeX | RIS 978-3-8027-3112-9, |
|
| Bahman Azarhoushang, Ali Zahedi, Heike Kitzig-Frank, Babak Soltani | Optimierung des Schleifprozesses durch den Einsatz von Laser | Diamond business, pp. 66-76, 2018 | BibTeX | RIS |
| Bahman Azarhoushang, Babak Soltani, Amir Daneshi | Study of the effects of laser micro structuring on grinding of silicon nitride ceramics | CIRP Annals - Manufacturing Technology, 67.2018(1), pp. 329-332, 2018 | BibTeX | RIS DOI |
| Mohammadali Kadivar, Bahman Azarhoushang, Sergey Shamray, Peter Krajnik | The effect of dressing parameters on micro-grinding of titanium alloy | Precision Engineering, 51.2018(1), pp. 176-185, 2018 | BibTeX | RIS DOI |
2017 |
|||
| Ali Zahedi, Bahman Azarhoushang | An analytical force and surface roughness model for cylindrical grinding of brittle materials | International Journal of Abrasive Technology, 8.2017(1), pp. 68-81, 2017 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang | An analytical force and surface roughness model for cylindrical grinding of brittle materials | ISAAT 2017: 20th International Symposium on Advances in Abrasive Technology (ISAAT), 3-6 December 2017, Okinawa, Japan, 2017 | BibTeX | RIS |
| Bahman Azarhoushang | Analyse des Trockenschleifens zylindrischer Bauteile mit strukturierten Schleifscheiben | 2017 | BibTeX | RIS |
| Amir Daneshi, Bahman Azarhoushang | Analysierung des Trockenschleifens mit strukturierter Schleifscheibe | Diamond business, pp. 36-43, 2017 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang, Javad Akbari | Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser | Scientia Iranica: Transactions B; Mechanical Engineering, 24.2017(5), pp. 2369-2378, 2017 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Thomas Stehle, Heike Kitzig-Frank, Hans-Christian Möhring | Effects of grinding process parameters on the surface topography of PCBN cutting inserts | International Journal of Abrasive Technology, 08.2017(2), pp. 121-132, 2017 | BibTeX | RIS DOI |
| Masih Paknejad, Amir Abdullah, Bahman Azarhoushang | Effects of high power ultrasonic vibration on temperature distribution of workpiece in dry creep feed up grinding | Ultrasonics Sonochemistry, 39.2017(11), pp. 392-402, 2017 | BibTeX | RIS DOI |
| Heike Kitzig-Frank, Bahman Azarhoushang, Rolf Rinderknecht | Einsparung von Schleif- und Poliervorgängen durch den Einsatz neuartiger Schleifwerkzeuge | Diamond business, pp. 18-25, 2017 | BibTeX | RIS |
| Bahman Azarhoushang, Amir Daneshi, Dal H. Lee | Evaluation of thermal damages and residual stresses in dry grinding by structured wheels | Journal of Cleaner Production, 142.2017(4), pp. 1922-1930, 2017 | BibTeX | RIS DOI |
| Thomas Stehle, Bahman Azarhoushang, Dina Becker, Rocco Eisseler | Gleitreibung der tribologischen Paarung CFK – Werkzeugschneidenoberfläche | wt Werkstattstechnik online, pp. 081-086, 2017 | BibTeX | RIS |
| Bahman Azarhoushang | Innovatives Spannsystem zur vereinfachten Anwendung der ultraschallunterstützten Zerspanung – EasyCut: Abschlussbericht | 2017 | BibTeX | RIS URN |
| Bahman Azarhoushang, Ali Zahedi | Laser conditioning and structuring of grinding tools – a review | Advances in Manufacturing, 5.2017(1), pp. 35-49, 2017 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Babak Soltani, Ali Zahedi | Laser-assisted grinding of silicon nitride by picosecond laser | The International Journal of Advanced Manufacturing Technology, 93.2017(5-8), pp. 2517-2529, 2017 | BibTeX | RIS DOI |
| Bahman Azarhoushang | Laserunterstützte Zerspanung | InnovationForum Zerspanungstechnologie, TechnologyMountains, 29. Juni 2017, Tuttlingen, pp. 3-1-3-17, 2017 | BibTeX | RIS |
| Heike Kitzig-Frank, Taghi Tawakoli, Bahman Azarhoushang | Material removal mechanism in ultrasonic-assisted grinding of Al2O3 by single-grain scratch test | The International Journal of Advanced Manufacturing Technology, 91.2017(9-12), pp. 2949-2962, 2017 | BibTeX | RIS DOI |
| Ali Zahedi, Bahman Azarhoushang | Microstructuring strategies of cBN grinding wheels | The International Journal of Advanced Manufacturing Technology, 91.2017(9-12), pp. 3925-3932, 2017 | BibTeX | RIS DOI |
| Mohammadali Kadivar, Ali Zahedi, Bahman Azarhoushang, Peter Krajnik | Modeling of the micro-grinding process considering the grinding tool topography | ISAAT 2017: 20th International Symposium on Advances in Abrasive Technology (ISAAT), 3-6 December 2017, Okinawa, Japan, 2017 | BibTeX | RIS |
| Mohammadali Kadivar, Ali Zahedi, Bahman Azarhoushang, Peter Krajnik | Modelling of the micro-grinding process considering the grinding tool topography | International Journal of Abrasive Technology, 08.2017(2), pp. 157-170, 2017 | BibTeX | RIS |
| Bahman Azarhoushang, Heike Kitzig-Frank, Ali Zahedi, Nima Jandaghi | Optimiertes Trockenschleifen mit mechanisch- und laserstrukturierten Schleifscheiben | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, pp. 20-25, 2017 | BibTeX | RIS |
| Heike Kitzig-Frank, Rolf Rinderknecht, Bahman Azarhoushang | Prozessoptimierung durch Kombination von Schleif- und Poliervorgang | 2017 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang | Strukturieren und Profilieren mittels Laser | 2017 | BibTeX | RIS |
| Mohammadali Kadivar, Heike Kitzig-Frank, Bahman Azarhoushang | The effect of dressing parameters on the chip loading and ground surface quality by using grinding pins and grinding wheels with very fine grits | Fourth European Seminar on Precision Optics Manufacturing, 2017, Teisnach, Germany: Proc. SPIE 10326, 2017 | BibTeX | RIS |
| Bahman Azarhoushang, Sebastian Ludwig | Verfahren und Vorrichtung zur Ermittlung der Schleiffähigkeit eines Schleifwerkzeugs | 2017 | BibTeX | RIS |
2016 |
|||
| Amir Daneshi, Bahman Azarhoushang | Cylindrical Grinding by Structured Wheels | Materials Science Forum, Vol.874.2016, pp. 101-108, 2016 | BibTeX | RIS DOI |
| Babak Soltani, Ali Zahedi, Bahman Azarhoushang, Sebastian Ludwig | Einfluss von Schnitt- und Vorschubgeschwindigkeit auf die Werkstückrauheit und Oberflächenstruktur beim ultraschallunterstützten Drehen | Horizonte, pp. 41-43, 2016 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang | FEM Based Modeling of Cylindrical Grinding Process Incorporating Wheel Topography Measurement | Procedia CIRP, pp. 201-204, 2016 | BibTeX | RIS DOI |
| Sergey Shamray, Amir Daneshi, Bahman Azarhoushang | High efficiency, high speed grinding of a composite material consisting of polymer concrete and steel structures | Procedia CIRP, pp. 607-610, 2016 | BibTeX | RIS DOI |
| Sebastian Ludwig, Bahman Azarhoushang | Innovatives Messverfahren zur Ermittlung der Zerspanungsfähigkeit von Schleifwerkzeugen | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 11. Seminar 2016, pp. 22-1-22-7, 2016 | BibTeX | RIS |
| Amir Daneshi, Nima Jandaghi, Sebastian Ludwig, Bahman Azarhoushang | Kühl- und Reinigungsdüsen; neue Entwicklungen und Auswahl | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 11. Seminar 2016, pp. 18-1-18-9, 2016 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang | Laser-Profiling of Metal-Bonded Diamond Grinding Wheels | Materials Science Forum, Vol.874.2016, pp. 272-276, 2016 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Ali Zahedi | Laserabrichten von superabrasiven Schleifwerkzeugen | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 11. Seminar 2016, pp. 4a-1-4a-11, 2016 | BibTeX | RIS |
| Bahman Azarhoushang, Ali Zahedi | Laserabrichten von superabrasiven Schleifwerkzeugen | Diamond business, pp. 64-70, 2016 | BibTeX | RIS |
| Bahman Azarhoushang, Ali Zahedi | Laserstrukturieren und -profilieren von Schleifwerkzeugen | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, pp. 32-36, 2016 | BibTeX | RIS |
| Bahman Azarhoushang, Amir Daneshi, Nima Jandaghi, Sebastian Ludwig | Moderne Kühlschmierstoffzuführsysteme im Schleifprozess | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, pp. 38-42, 2016 | BibTeX | RIS |
| Moderne Schleiftechnologie und Feinstbearbeitung | 11. Seminar 2016 "Moderne Schleiftechnologie und Feinstbearbeitung", Bahman Azarhoushang (Ed.)2016 | BibTeX | RIS |
|
| Heike Kitzig-Frank, Taghi Tawakoli, Bahman Azarhoushang | Neue ultraschallunterstützte Abrichtmethode für einschichtig galvanisch gebundene Diamantschleifscheiben | Diamond business, pp. 62-71, 2016 | BibTeX | RIS |
| Bahman Azarhoushang | Prohibiting the loading of grinding tools via infiltration | International Journal of Abrasive Technology, 7.2016(3), pp. 246-256, 2016 | BibTeX | RIS |
| Bahman Azarhoushang, Jürgen Struß, Heike Kitzig-Frank | Schwingungsunterstütztes Außenrundschleifen mittels einer Magnetspindel | Jahrbuch Schleifen, Honen, Läppen und Polieren, Vulkan-Verlag: Essen, pp. 131-140, 2016 | BibTeX | RIS 978-3-8027-2984-3, |
| Ali Zahedi, Bahman Azarhoushang | Strukturieren und Profilieren mittels Laser | Moderne Schleiftechnologie und Feinstbearbeitung : neue Entwicklungen und Trends aus Forschung und Praxis / 11. Seminar 2016, pp. 4b-1-4b-11, 2016 | BibTeX | RIS |
| Sebastian Ludwig, Nima Jandaghi, Bahman Azarhoushang | Verfahren und Vorrichtung zur Beurteilung der Oberfläche von Schleifwerkzeugen mit geometrisch unbestimmter Schneide | 2016 | BibTeX | RIS |
| Bahman Azarhoushang, Sebastian Ludwig | Verfahren und Vorrichtung zur Ermittlung der Schleiffähigkeit eines Schleifwerkzeugs | 2016 | BibTeX | RIS |
2015 |
|||
| Heike Kitzig-Frank, Taghi Tawakoli, Bahman Azarhoushang | A novel ultrasonic-assisted dressing method of electroplated grinding wheels via stationary diamond dresser | The International Journal of Advanced Manufacturing Technology, 86.2016(1), pp. 487-494, 2015 | BibTeX | RIS DOI |
| Sergey Shamray, Bahman Azarhoushang | Bearbeitung „in einem Guss“ - Optimierung des Schleifprozesses für die Bearbeitung hybrider Leichtbauteile aus Mineralguss | Horizonte, pp. 8-10, 2015 | BibTeX | RIS |
| Tim Luckstein, Ali Zahedi, Bahman Azarhoushang | Einsatz eines Pikosekundenlasers zur Mikrostrukturierung von cBN-Schleifscheiben | 2015 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang | Laserkonditionieren von Diamantschleifscheiben und deren Leistungsfähigkeit | Diamond business, pp. 20-28, 2015 | BibTeX | RIS |
| Ali Zahedi, Bahman Azarhoushang, Javad Akbari | Optimization and application of laser-dressed cBN grinding wheels | Advanced Materials Research, Vol.806.2015, pp. 90-96, 2015 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Rolf Rinderknecht, Jürgen Struß, Alireza Vesali | Optimizing the grinding process through reduction of the loading of grinding tool by infiltration | The International Journal of Adcanced Manufacturing Technology, Vol.806.2015, pp. 71-77, 2015 | BibTeX | RIS DOI |
| Ali Zahedi, Taghi Tawakoli, Bahman Azarhoushang, Javad Akbari | Preparation and performance of laser dressed diamond grinding wheels | The 23rd Annual International Conference on Mechanical Engineering-ISME2015: 12-14 May, 2015, Mech. Eng. Dept., Amirkabir University of Technology, Tehran, Iran, 2015 | BibTeX | RIS |
| Bahman Azarhoushang, Nima Jandaghi | Präzisionsschleifen und Superfinishen von keramikbeschichteten Walzen | Diamond business, pp. 34-43, 2015 | BibTeX | RIS |
| Bahman Azarhoushang, Alireza Vesali, Jürgen Struß, Rolf Rinderknecht | Reduzierung der Zusetzung von Schleifscheiben durch Infiltration | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, pp. 42-47, 2015 | BibTeX | RIS |
2014 |
|||
| Bahman Azarhoushang | Anwendungsorientierte Prozessauslegung zum Rundschleifen ohne Formfehler und thermische Schädigung | Diamond business, pp. 58-65, 2014 | BibTeX | RIS |
| Ali Zahedi, Taghi Tawakoli, Javad Akbari, Bahman Azarhoushang | Conditioning of Vitrified Bond CBN Grinding Wheels Using a Picosecond Laser | Advanced Materials Research, Vol.1017.2014, pp. 573-579, 2014 | BibTeX | RIS DOI |
| Bahman Azarhoushang | Das Abrichten als ein integraler Bestandteil des Schleifprozesses: Teil 2 Unkonventionelle Abrichtprozesse | Diamond business, pp. 82-89, 2014 | BibTeX | RIS |
| Bahman Azarhoushang, Abdolreza Rasifard | Das Abrichten als integraler Bestandteil des Schleifprozesses: Teil 1 Mechanische Abrichtprozesse | Diamond business, pp. 66-73, 2014 | BibTeX | RIS |
| Bahman Azarhoushang, Ali Zahedi, Tim Luckstein | Erzeugung von Mikrostrukturen auf einer cBN-Schleifscheibe mit einem Pikosekundenlaser | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, 06.2014(3), pp. 14-19, 2014 | BibTeX | RIS |
| Bahman Azarhoushang, Maximilian Riedesel zu Eisenbach | Leistungspotentiale beim Walzenschleifen | Schleifen + Polieren, pp. 6-14, 2014 | BibTeX | RIS |
| Heike Kitzig-Frank, Nima Jandaghi, Bahman Azarhoushang, Alireza Vesali | Optimizing the Dry Grinding Process on the Basis of Bond Materials | Advanced Materials Research, Vol.1017.2014, pp. 237-242, 2014 | BibTeX | RIS DOI |
| Ali Zahedi, Taghi Tawakoli, Bahman Azarhoushang, Javad Akbari | Picosecond laser treatment of metal-bonded CBN and diamond superabrasive surfaces | The International Journal of Advanced Manufacturing Technology, 76.2015(5-8), pp. 1479-1491, 2014 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Maximilian Riedesel zu Eisenbach | Produktivitäts- und Qualitätssteigerung beim Walzenschleifen | Moderne Schleiftechnologie und Feinstbearbeitung 2014 : neue Entwicklungen und Trends aus Forschung und Praxis / 10. Seminar "Moderne Schleiftechnologie und Feinstbearbeitung" am 15.05.2014 in Stuttgart, pp. 16-1-16-12, 2014 | BibTeX | RIS 978-3-8027-2979-9, |
| Bahman Azarhoushang | Wear of non-segmented and segmented diamond wheels in high-speed deep grinding of carbon fibre-reinforced ceramics | The International Journal of Advanced Manufacturing Technology, 74.2014(9-12), pp. 1293-1302, 2014 | BibTeX | RIS DOI |
2013 |
|||
| Taghi Tawakoli, Bahman Azarhoushang | Entwicklungen im ultraschallunterstützten Schleifen für Keramik- und Metallwerkstoffe | Jahrbuch Schleifen, Honen, Läppen und Polieren, Vulkan-Verlag: Essen, pp. 192-204, 2013 | BibTeX | RIS 978-3-8027-2971-3, |
2012 |
|||
| Bahman Azarhoushang, Taghi Tawakoli, Nima Jandaghi | Band- und Stein-Superfinishing von zylindrischen Präzisionsbauteilen | Diamond business, pp. 18-27, 2012 | BibTeX | RIS |
| Bahman Azarhoushang, Taghi Tawakoli, Nima Jandaghi | Band- und Stein-Superfinishing von zylindrischen Präzisionsbauteilen | Moderne Schleiftechnologie und Feinstbearbeitung 2012 : neue Entwicklungen und Trends aus Forschung und Praxis / 9. Seminar "Moderne Schleiftechnologie und Feinstbearbeitung" am 15.05.2012 in Stuttgart, pp. 20-1-20-14, 2012 | BibTeX | RIS 978-3-8027-2969-0, |
| Taghi Tawakoli, Bahman Azarhoushang | Entwicklungen im ultraschallunterstützten Schleifen für Keramik- und Metallwerkstoffe | Moderne Schleiftechnologie und Feinstbearbeitung 2012: 9. Seminar "Moderne Schleiftechnologie und Feinstbearbeitung" am 15.05.2012 in Stuttgart, pp. 4b-1-4b-13, 2012 | BibTeX | RIS 978-3-8027-2969-0, |
| Taghi Tawakoli, Bahman Azarhoushang | Entwicklungen im ultraschallunterstützten Schleifen für Keramik- und Metallwerkstoffe | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, pp. 40-47, 2012 | BibTeX | RIS |
2011 |
|||
| Bahman Azarhoushang, Taghi Tawakoli | Development of a novel ultrasonic unit for grinding of ceramic matrix composites | The International Journal of Advanced Manufacturing Technology, Vol.57.2011, pp. 945-955, 2011 | BibTeX | RIS DOI |
| Taghi Tawakoli, Bahman Azarhoushang, Nima Jandaghi | Entwicklung eines „Ultraschallsystems“ zur Realisierung flexibler ultraschallunterstützter Zerspanung | 2011 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang | Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheel | International Journal of Machine Tools and Manufacture, 51.2011(2), pp. 112-119, 2011 | BibTeX | RIS DOI |
| Taghi Tawakoli, Rasifard Abdolreza, Bahman Azarhoushang | New Developments in Ultrasonic-Assisted Grinding and Dressing | The 4th International Multi-Conference on Engineering and Technological Innovation, July 19th - July 22nd, 2011, Orlando, Florida, USA, Proceedings, Volume I, pp. 210-214, 2011 | BibTeX | RIS 978-1-936338-36-8, |
| Taghi Tawakoli, Bahman Azarhoushang | Theoretical and experimental investigation of intermittent grinding of SiC with a segmented grinding wheel | International Journal of Abrasive Technology, 04.2011(1), pp. 90-99, 2011 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang, Abdolreza Rasifard | Wear Behavior of a Vitrified Bond CBN Wheel by Ultrasonic-Assisted Creep Feed Profile Grinding of Inconel 718 | Advances in abrasive technology XIV : selected, peer reviewed papers from the 14th International Symposium on Advances in Abrasive Technology (ISAAT 2011), Sept. 18-21, 2011, Stuttgart, Germany, pp. 122-127, 2011 | BibTeX | RIS 978-3-03785-231-6, |
2010 |
|||
| Taghi Tawakoli, Bahman Azarhoushang, Nima Jandaghi | Entwicklung eines neuartigen Ultraschallsystems zur Realisierung flexibler ultraschallunterstützter Zerspanung | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, pp. 28-33, 2010 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang | Intermittent grinding of advanced ceramic with the T-Tool grinding wheel | Advanced Materials Research, Vol.126-128.2010, pp. 615-620, 2010 | BibTeX | RIS DOI |
| Taghi Tawakoli, Bahman Azarhoushang | Längeres Leben dank Ultraschall | Werkzeugschleifen : Fertigung extra, pp. 44-45, 2010 | BibTeX | RIS |
| Bahman Azarhoushang, Taghi Tawakoli, Engelbert Westkämper | Theoretical and experimental analysis of SiC dry grinding while reducing momentarily engaging cutting edges | CIRP 2nd International Conference Process Machine Interactions June 10 - 11, 2010, Vancouver, BC: Conference proceedings, 2010 | BibTeX | RIS 978-0-9866331-0-2, |
2009 |
|||
| Taghi Tawakoli, Bahman Azarhoushang | Development of a Novel Method for Dry Grinding of Soft Steel | ASME 2008 International Mechanical Engineering Congress and Exposition Volume 15: Processing and Engineering Applications of Novel Materials, Boston, Massachusetts, USA, October 31–November 6, 2008, pp. 145-150, 2009 | BibTeX | RIS 978-0-7918-3840-2, |
| Taghi Tawakoli, Bahman Azarhoushang | Effects of Ultrasonic Assisted Grinding on CBN Grinding Wheels Performance | ASME 2009 International Manufacturing Science and Engineering Conference, Volume 2, West Lafayette, Indiana, USA, October 4–7, 2009, pp. 209-214, 2009 | BibTeX | RIS 978-0-7918-3859-4, DOI |
| Taghi Tawakoli, Engelbert Westkämper, Bahman Azarhoushang | Effects of Vibration-Assisted Grinding on Wear Behavior of Vitrified Bond AI2O3 Wheel | Advanced Materials Research, Vol.76-78.2009, pp. 21-26, 2009 | BibTeX | RIS DOI |
| Taghi Tawakoli, Abdolreza Rasifard, Bahman Azarhoushang | Einsatz der Ultraschallunterstützung beim Abrichten und Schleifen | Schleifen + Polieren, pp. 4-10, 2009 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang, Mohammad Rabiey | Grinding of Soft Steel with Assistance of Ultrasonic Vibrations | Key Engineering Materials, Vol.389-390.2009, pp. 271-276, 2009 | BibTeX | RIS DOI |
| Bahman Azarhoushang, Taghi Tawakoli | Ultraschalleinheit für die Materialbearbeitung | 2009 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang, Mohammad Rabiey | Ultrasonic assisted dry grinding of 42CrMo4 | The International Journal of Advanced Manufacturing Technology, 42.2009(9-10), pp. 883-891, 2009 | BibTeX | RIS DOI |
| Taghi Tawakoli, Bahman Azarhoushang, Mohammad Rabiey | Ultrasonic-assisted grinding of soft steel | Industrial Diamond Quarterly, pp. 40-44, 2009 | BibTeX | RIS |
| Taghi Tawakoli, Rasifard Abdolreza, Bahman Azarhoushang | Vorteilhafter Einsatz der Ultraschallunterstützung beim Abrichten und Schleifen | Diamant-Hochleistungswerkzeuge Dihw: Dihw-Magazin, pp. 40-43, 2009 | BibTeX | RIS |
2008 |
|||
| Taghi Tawakoli, Abdolreza Rasifard, Bahman Azarhoushang | Abrichten von CBN-Schleifscheiben mit Ultraschallunterstützung | Moderne Schleiftechnologie und Feinstbearbeitung 2008 : neue Entwicklungen und Trends aus Forschung und Praxis / 7. Seminar "Moderne Schleiftechnologie und Feinstbearbeitung" am 15.05.2008 in Stuttgart, pp. 16-1-16-14, 2008 | BibTeX | RIS 978-3-00-024493-3, |
| Taghi Tawakoli, Abdolreza Rasifard, Bahman Azarhoushang | Dressing of CBN grinding wheels with ultrasonic assistance | International Journal of Mechatronics and Manufacturing Systems, 01.2008(4), pp. 321-331, 2008 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang | Dry grinding of soft steel with use of ultrasonic vibrations | Advances in manufacturing technology - XXII : proceedings of the 6th International Conference on Manufacturing Research (ICMR08); Brunel University, UK, 9th - 11th September 2008. Volume 2, 2008 | BibTeX | RIS 978-1-902316-60-4, |
| Taghi Tawakoli, Bahman Azarhoushang, Mohammad Rabiey | Effects of ultrasonic vibration on grinding of 100Cr6 | International Journal of Mechatronics and Manufacturing Systems, 01.2008(4), pp. 332-342, 2008 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang | Influence of ultrasonic vibrations on dry grinding of soft steel | International Journal of Machine Tools and Manufacture, 48.2008(14), pp. 1585-1591, 2008 | BibTeX | RIS DOI |
| Taghi Tawakoli, Bahman Azarhoushang, Mohammad Rabiey | Ultraschallunterstütztes Schleifen von nicht gehärtetem Stahl | Industrie-Diamanten-Rundschau : IDR, 42.2008(3), pp. 54-63, 2008 | BibTeX | RIS |
| Taghi Tawakoli, Bahman Azarhoushang, Mohammad Rabiey | Ultraschallunterstütztes Schleifen von nicht gehärtetem Stahl | Moderne Schleiftechnologie und Feinstbearbeitung 2008 : neue Entwicklungen und Trends aus Forschung und Praxis / 7. Seminar "Moderne Schleiftechnologie und Feinstbearbeitung" am 15.05.2008 in Stuttgart, pp. 4a-1-4a-16, 2008 | BibTeX | RIS 978-3-00-024493-3, |
2007 |
|||
| A. G. Chegini, Javad Akbari, H. Sadeghian, Bahman Azarhoushang | Effect of Ultrasonic Vibration on Surface Roughness of NiTi based Shape Memory Alloy | 2nd Tehran International Congress on Manufacturing Engineering; TICME 2007, 10 - 13 December, 2007, Theran, Iran, pp. 2333-2341, 2007 | BibTeX | RIS |
| Bahman Azarhoushang, Javad Akbari | Ultrasonic-assisted drilling of Inconel 738-LC | International Journal of Machine Tools and Manufacture, 47.2007(7-8), pp. 1027-1033, 2007 | BibTeX | RIS DOI |